Xerox 604S14200 - Manual (Page 32)

604P15700 32
Go to a workstation and...
1. Create a test job and send it to the printer with a
workstation utility or through a queue on your
operating system that supports Port 9100 print-
ing.
2. Check your test job for quality and use the problem
solving section of the Reference Guide (pdf file)
located on the Customer Documentation CD for
resolving print defects.
3. If your print job does not print, refer to the trouble-
shooting section in the System Administration
Guide (pdf file) located on the Customer Docu-
mentation CD to correct the problem.
4. Repeat this Go to a workstation and... procedure
at each workstation that will print to this printer or
at other servers where a queue has been created.
Port 9100 TCP/IP Printing