Using the macro feature, English – Yamaha DSP-AX2 EN User Manual
Page 49
English
47
Remote Control Features
Using the Macro Feature
The Macro feature makes it possible to perform a series of operations by pressing just one button. For example, when you want to play a CD,
normally you would turn on the components, select the CD input, and press the play button to start playback. Using the Macro feature, you
can perform all those operations by simply pressing the CD macro button. The macro buttons (the input buttons and
SYSTEM POWER /
STANDBY
) are factory preset with macro programs. You can also program your own macros.
*1 In order to turn on some Yamaha components connected to this unit, connect those components to
AC OUTLETS
on the rear panel.
*2 If the macro you select includes power on/off functions, the component may turn off if it is already on when you press the macro button. For example, if
your TV is on and you press the
SYSTEM POWER
macro button, the TV turns off.
*3 The components for which playback can be started are any YAMAHA remote control-compatible MD recorders, CD players, CD recorders, and DVD
players. When using macros to operate components other than these or non-YAMAHA components, it is either necessary to learn the
PLAY
button on the
control area of that component or to setup a manufacturer code.
(ex) Press a Macro button
Automatically transmits signals of each button sequentially
(CD Area*
3
)
Macro button
First
Second
—————
—————
Third
—————
—————
—————
—————
—————
—————
—————
—————
—————
(D-TV Area*
2
)
*
1
(MD/TAPE Area*
3
)
(DVD Area*
3
)
(VCR1 Area*
3
)
(VCR2/DTR Area*
3
)
(CD-R Area*
3
)