Yamaha DSP-AX2 EN - Manual (Page 33)

English
31
SET MENU Items
The SET MENU consists of sixteen items including the Speaker Set, Center Graphic Equalizer and Parameter Initialization features.
Choose the appropriate item and adjust or select the values as necessary.
Notes:
• You can adjust the items in the SET MENU while reproducing a source.
• We recommend that you adjust the items in the SET MENU while using a video monitor. It is easier to see the video monitor screen than it is to see
the front panel display on this unit while adjusting SET MENU items.
Items
1. SPEAKER SET
1A. CENTER SP
1B. MAIN SP
1C. REAR L/R SP
1D. REAR CT SP
1E. LFE/BASS OUT
1F. FRNT EFCT SP
1G. MAIN LEVEL
2. LOW FREQ. TEST
3. L/R BALANCE
4. HP TONE CTRL
5. CENTER GEQ
6. INPUT RENAME
7. I/O ASSIGN
8. INPUT MODE
9. PARAMETER INI
10. DOLBY D. SET
10A. LFE LEVEL
10B. D-RANGE
11. DTS SET
12. 6.1/ES AUTO
13. SP DELAY TIME
14. DISPLAY SET
15. MEMORY GUARD
Descriptions
Selects the output mode suitable for your Center speaker.
Selects the output mode suitable for your Main speakers.
Selects the output mode suitable for your Rear speakers.
Selects the output mode suitable for your Rear Center speaker.
Selects the output mode for LFE/BASS signal output.
Selects the output mode suitable for your Front Effect speakers.
Selects the output level for your Main channels.
Matches the Subwoofer level with the level of the other speakers.
Adjusts the sound balance for Left and Right channels.
Adjusts the tonal balance of the headphones.
Matches the Center speaker tonal quality with the Main speakers.
Changes the name of the inputs.
Assigns the I/O terminals to the designated input sources.
Selects the initial input mode of the sources.
Initializes the parameters of a group of DSP programs.
Adjusts the output level of the LFE channel for Dolby Digital signals.
Adjusts the dynamic range for Dolby Digital signals.
Adjusts the output level of the LFE channel for DTS signals.
Selects the AUTO mode of Dolby Digital Matrix 6.1 and DTS ES
decoding.
Adjusts the delay time for Center and Rear Center speakers.
Selects the display settings.
Locks DSP program parameters and other SET MENU settings.
Setting
LRG / SML / NONE
LARGE / SMALL
LRG / SML / NONE
LRG / SML / NONE
SWFR / MAIN / BOTH
YES / NONE
Normal / –10dB
TEST TONE;
OFF / ON
OUTPUT;
MAIN L/R, MAIN L, CENTER, MAIN R, R
SUR, REAR CT, L SUR, SWFR, FRONT
FREQ.;
35Hz—250Hz
(Wide or narrow band)
L to 0 to R
BASS; –6dB to +3dB
TRBL; –6dB to +3dB
5-band; –6dB to +6dB
Up to eight characters.
Digital I/O, CMPNT input.
AUTO / LAST
1 to 12
SP, HP; –20dB to 0dB
SP, HP; MAX / STD / MIN
SP, HP; –10dB to +10dB
ON / OFF
CENTER; 0ms to 5ms
REAR CNTR; 0ms to 30ms
BLUE BACK; AUTO/OFF
OSD SHIFT; 0 to 10
DIMMER; –4 to 0
OFF / ON
Page
33–35
35
36
36
36
36
37
37
37
38
38
38
39
39
39