I/o assign, Input mode, Parameter ini (parameter initialization) – Yamaha DSP-AX2 EN User Manual
Page 39: 7a cmpnt-v input, 7b optical out, 7c optical in, 8 input mode, 9 param. ini, 7d coaxial in
English
37
SET MENU Items
7. I/O ASSIGN
Use this feature to designate the input for the
COMPONENT
jacks (
A
and
B
) and
DIGITAL INPUT/OUTPUT
jacks (1) to (10)* to any
sources you want. Change the setting when there are not enough digital input jacks depending on the source components you are using.
(*(10) can be selected for General and China models only.) Initial settings are shown on the display.
8. INPUT MODE
Use this feature to designate the input mode for sources connected to
DIGITAL
INPUT
jacks when you turn on this unit.
Select “AUTO” to allow this unit to automatically detect the type of input
signal and select the appropriate input mode.
Select “LAST” to set this unit to automatically select the last input mode used
for that source.
9. PARAMETER INI (Parameter Initialization)
Use this feature to initialize the parameters for each DSP program within a DSP
program group. When you initialize a DSP program group, all of the parameter values
within that group revert to their initial settings.
Press the DSP program group button on the remote control for the DSP
program you want to initialize.
• All of the DSP programs within the selected program group are initialized.
Repeat this step to initialize other DSP program groups.
Notes:
• The asterisk (*) mark next to a DSP program group number indicates that you have
changed the parameter values in one or more DSP programs within that group.
• The parameter values of the DSP programs do not change if you initialize a
program group that does not have the asterisk (*) mark.
• When the MEMORY GUARD function is set to “ON”, you cannot initialize any
program groups.
• You cannot initialize the individual DSP programs within a group separately.
Caution:
• Once you initialize a DSP program group, you cannot have this unit revert the
parameter values back to the previous settings automatically.
■
7A. For the
COMPONENT
VIDEO INPUT jacks
[A] and [B]
■
7B. For the
OPTICAL OUTPUT
jacks (1) and (2)
■
7C. For the
OPTICAL INPUT
jacks (3) to (7)
■
7D. For the
COAXIAL INPUT
jacks (8) to (10)*
7A CMPNT-V INPT
[A]…………
DVD
7A CMPNT-V INPUT
≥ [A]…………
DVD
[B]…………D-TV/LD
7B OPTICAL OUT
(1)…………MD/TAPE
7B OPTICAL OUT
≥ (1)…………MD/TAPE
(2)…………
CD-R
7C OPTICAL IN
(5)…………
DVD
7C OPTICAL IN
≥
(3)…………
CD
(4)…………
CD-R
(5)…………
DVD
(6)…………D-TV/LD
(7)…………
SAT
7D COAXIAL IN
(9)………… CABLE
8 INPUT MODE
“AUTO
LAST
8 INPUT MODE
>AUTO
LAST
9 PARAM. INI
*1
2
3
4
9 PARAM. INI
5
6
7
8
9 PARAM. INI
9
10
11
12
9 PARAM. INI
*1
2
3
4
5
6
7
8
9
10
11
12
7D COAXIAL IN
≥
(8)…………
CD
(9)………… CABLE
(10)……… LD-RF
*