Yamaha DSP-AX2 EN - Manual (Page 30)

Introduction
Preparations
Basic Operation
Advanced Operation
Additional
Information
Appendix
28
Basic Playback
Selecting a Sound Field Program
You can enhance your listening experience by selecting a DSP sound field program. The 25 DSP sound field programs are divided into 12
DSP program groups.
1 1 Set 10KEY/DSP on the remote to DSP .
2 2 Press the DSP button on main unit and rotate the Multi jog knob to select the
desired sound field program.
Notes:
• If a DTS or Dolby Digital signal is input when the input mode is set to “AUTO”,
the sound field program automatically switches to the appropriate decoding
program.
• Choose a sound field program based on your listening preference, not on the name
of the program. The acoustics of your listening room affect the sound field
program. Minimize the sound reflections in your room to maximize the effect
created by the program.
• When you select an input source, the main unit automatically selects the last sound
field program used with that source.
• When you turn off the main unit, the current source and sound field program are
memorized and are automatically selected when you turn on the power again.
• When high rate 96 kHz sampling digital signals are output from source equipment,
the DSP sound field cannot operate on the source sounds. In this case, the sounds
are reproduced as normal 2-channel stereo.
■ Virtual CINEMA DSP and HP CINEMA DSP
You can experience the virtual CINEMA DSP sound field by setting the 1C. REAR L/R SP item in the SET MENU to “NONE.” The sound
field processing is changed to the Virtual CINEMA DSP mode according to the selected sound field program. The Virtual CINEMA DSP
allows you to enjoy the virtual sound fields without Rear speakers. Signals for Rear channels are output from the Main speakers. You can
also listen to HP (Headphone) CINEMA DSP by connecting your headphones to the
PHONES jack while the DSP sound fields are on.
When high rate 96 kHz sampling digital signals are output from source component, the Virtual CINEMA DSP and HP CINEMA DSP cannot
operate on the source sounds.
Note:
• This unit is not set in the virtual CINEMA DSP mode even if “1C REAR L/R SP” is set to NONE in the following cases:
– when the 8ch Stereo, DOLBY DIGITAL/Normal or DTS/Normal program is selected;
– when the sound effect is turned off;
– when 6CH INPUT is selected as the input source;
– when 96-kHz sampling digital signals are input to this unit;
– when the Dolby Digital KARAOKE source is played;
– when using the test tone; or
– when connecting the headphones.
■ Normal stereo reproduction
For normal stereo reproduction, press EFFECT to turn off the effect.
Notes:
• When you turn off the effect, no sound is reproduced from the Front Effect, Center, Rear,
and Rear Center speakers.
• If you turn off the effect while DTS or Dolby Digital signals are being reproduced, the
dynamic range of the signal is automatically compressed.
• The sound volume may be extremely reduced when you turn off the effect or if you
change a SET MENU item. In this case turn on the effect.
6.1/ES
If you want to utilize the Rear Center speaker
with a 5.1 channel program source, press
6.1/
ES .
10KEY/DSP
Hi-Fi DSP Programs
CINEMA-DSP Programs
Entertainment
Game
Concert Video
Pop/Rock
Classical/Opera
TV Theater
Mono Movie
Variety/Sports
Movie Theater 1
Spectacle
Sci-Fi
Movie Theater 2
Adventure
General
q /DTS SURROUND
Normal/Matrix 6.1/ES
Enhanced/6.1/ES
EFFECT
EFFECT OFF
Concert Hall 1
Europe Hall A
Europe Hall B
Concert Hall 2
U.S.A. Hall C
Live Concert
Church
Freiburg
Royaumont
Jazz Club
Village Gate
The Bottom Line
Rock Concert
Roxy Theatre
Arena
Stadium
Anaheim
Bowl
Entertainment
Disco
8ch Stereo