Yamaha CD Recordable/Rewritable Drive CRW2200S - Manual (Page 45)

E-IDE (ATAPI) Connection Set Up
37
This section describes how to connect the CRW2200E by E-IDE (ATAPI) to a tower
type computer.
In this description, about some parts that is duplicated with the part of “Connecting
the CRW2200S” in “SCSI Connection Set Up” (
→ P. 14 – 31), see the reference page
described here.
Note
The way of removing the casing or panel, or installing built-in devices may differ from your
computer. Be sure to follow the procedures in the documentation that came with your computer.
Opening the Computer
1 Shut down your computer and unplug it from the AC outlet.
(→ → → →P. 14 step 1 1 1 1)
2 2 2 2 Remove all attached cables and peripheral devices and the outer casing
of the computer. If you need to remove screws in the process, make sure
you don’t lose them. Remove the cover and front panel of the computer.
(→
→ → →P. 14 step 2 2 2 2)
3 3 3 3 Touch a metal part of the computer’s chassis or power supply unit to
discharge any static electricity from your body. Or, wear an anti-static
grounding wrist strap.
(→
→ → →P. 15 step 3 3 3 3)
Connecting the CRW2200E