Yamaha CD Recordable/Rewritable Drive CRW2200S - Manual (Page 38)

SCSI Connection Set Up
30
Configuring for the Operating System
18 18 18 18 After the computer’s operating system (Windows 95/98/98 Second
Edition/Me) has loaded, open “Control Panel” and double-click on the
“System” icon. Select the “Device Manager” tab and double-click on
“CDROM.” If the drive has been correctly installed, it should be listed as
shown below. Similarly, double-click on “SCSI controllers” and the
SCSI card should be listed as shown below if it has been properly
installed.
* This is a screen shown in the Windows Me environment.
For Windows NT
You can verify by opening “Control Panel,” double-clicking on “SCSI Adapter” and clicking
on the “Devices” tab.
For Windows 2000 Professional
You can verify by opening “Control Panel,” double-clicking on “System,” selecting the
“Hardware” tab, and clicking on the “Device Manager” button in “System Properties.”
Notes
• For details about how to use the operating system, refer to the documentation that came
with it.
• If there is a or mark etc. next to the icon for the CRW2200S or the SCSI card, this
means that it has not been installed correctly.