Yamaha CD Recordable/Rewritable Drive CRW2200S - Manual (Page 25)

SCSI Connection Set Up
17
Connecting the digital audio cable
The digital connection for the CRW2200S is ideal for pure quality audio playback,
outputting digital signals recorded on CDs to the sound card without any distortion.
Examples of the digital connection
To output digital audio signals to external devices, you must use the digital connection to
connect the unit and the sound card. With this connection you can:
• Enjoy music using a digital audio amplifier.
• Record music digitally with an MD player.
Connect the digital audio cable to the DIGITAL AUDIO OUT connector on the
rear panel of the CRW2200 drive, making sure of the connector’s direction.
Note
For the digital connection, you need a digital audio cable with appropriate connectors, and a
sound card with SPDIF (digital audio) input connectors.
Digital audio cable
Ground (G)
Signal (D)
DIGITAL AUDIO
OUT
(to Sound card)