Yamaha CD Recordable/Rewritable Drive CRW2200S - Manual (Page 31)

SCSI Connection Set Up
23
Note
The default setting of the Terminator switch is ON.
➃ Block Size
The data block size of the CRW2200S can be set to 512 bytes per sector by
setting the Block Size jumper switch to “ON.” This is necessary when installing
the CRW2200S on a UNIX-based workstation. It is not necessary for Windows
95/98/98 Second Edition/Me/NT4.0/2000 Professional computers.
About the Block Size
Block Size shows the capacity of a sector that is the unit of data management of OS.
Note
By factory default, the Block Size jumper switch is set to “OFF” and should normally be left
in this state.
ID SELECT
PARITY
TERATR
BLOC SIE
ID SELECT
PARITY
TERATR
BLOC SIE
1 1 2 2 4 4
Termination ON (Default) Termination OFF
Set to “ON” if CRW2200S is
last device on SCSI chain Set to "OFF" if the CRW2200S
is not the last device on the
SCSI chain
ID SELECT
PARITY
TERMINATOR
L SE
ID SELECT
PARITY
TERMINATOR
L SE
1 1 2 2 4 4
Block size OFF (Default) Block size ON
Set to “ON” when installing
CRW2200S on UNIX
workstation