ZyXEL Communications 792H User Manual
Page 304
Prestige 791R G.SHDSL Router
27-16
NAT
Step 5. In menu 15.1.1.1, select Type as One-to-One (direct mapping for packets going both ways),
and set the local Start IP as 192.168.1.10 (the IP address of FTP Server 1) and the global Start
IP as 10.132.50.1 (our first IGA). See the figure below.
Figure 27-17 Example 3 - Menu 15.1.1.1
Step 6. Repeat the previous step for rules 2 to 4 as outlined above.
Step 7. When finished, menu 15.1.1 should look as follows.
Figure 27-18 Example 3 - Final Menu 15.1.1
Menu 15.1.1.1 Address Mapping Rule
Type= One-to-One
Local IP:
Start= 192.168.1.10
End = N/A
Global IP:
Start= 10.132.50.1
End = N/A
Server Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Menu 15.1.1 - Address Mapping Rules
Set Name= Example3
Idx Local Start IP Local End IP Global Start IP Global End IP Type
--- --------------- --------------- --------------- --------------- ------
1. 192.168.1.10 10.132.50.1 1-1
2 192.168.1.11 10.132.50.2 1-1
3. 0.0.0.0 255.255.255.255 10.132.50.3 M-1
4. 10.132.50.3 Server
5.
6.
7.
8.
9.
10.
Action= Edit Select Rule=
Press ENTER to Confirm or ESC to Cancel: