beautypg.com

ZyXEL Communications 792H User Manual

Page 296

background image

Prestige 791R G.SHDSL Router

27-8

NAT

Figure 27-7 Editing/Configuring an Individual Rule in a Set

Table 27-4 Editing/Configuring an Individual Rule in a Set

FIELD DESCRIPTION EXAMPLE

Type

Press [SPACE BAR] and then [ENTER] to select from a total of five
types. Server allows you to specify multiple servers of different
types behind NAT to this computer. See section 27.4.3 for an
example.

One-to-One

Local IP

Only local IP fields are N/A for server; Global IP fields MUST be set
for Server.

Start This is the starting local IP address (ILA).

0.0.0.0

End This is the ending local IP address (ILA). If the rule is for all local

IPs, then put the Start IP as 0.0.0.0 and the End IP as
255.255.255.255. This field is N/A for One-to-One and Server types.

N/A

Global IP

Start This is the starting global IP address (IGA). If you have a dynamic

IP, enter 0.0.0.0 as the Global IP Start. Note that Global IP Start
can be set to 0.0.0.0 only if the types are Many-to-One or Server.

0.0.0.0

End This is the ending global IP address (IGA). This field is N/A for One-

to-One, Many-to-One and Server types.

N/A

Server

Mapping Set

Only available when Type is set to Server. Type a number from 1 to
10 to choose a server set from menu 15.2.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One


Local IP:

Start=

End = N/A

Global IP:

Start=
End = N/A

Server Mapping Set= N/A

Press ENTER to Confirm or ESC to Cancel:


Press Space Bar to Toggle.