ZyXEL Communications 792H User Manual
Page 269
Prestige 792H G.SHDSL Router
Internet Access
23-3
Table 23-1 Internet Access Setup
FIELD DESCRIPTION
EXAMPLE
Idle Timeout
This value specifies the number of idle seconds that elapse
before the Prestige automatically disconnects the PPPoE
session.
0
IP Address
Assignment
Press [
SPACE BAR
] to select Static or Dynamic address
assignment.
Dynamic
IP Address Enter the IP address supplied by your ISP if applicable.
N/A
Network Address
Translation
Press [
SPACE BAR
] to select None, SUA Only or Full
Feature. Please see the NAT Chapter for more details on the
SUA (Single User Account) feature.
SUA Only
Address Mapping Set Type the numbers of mapping sets (1-8) to use with NAT.
See the NAT chapter for details.
N/A
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
If all your settings are correct your Prestige automatically connects to the Internet. If the connection fails,
note the error message that you receive on the screen and take the appropriate troubleshooting steps.