ZyXEL Communications NWA3160 - Manual (Page 83)

Chapter 6 AP Controller Mode (NWA-3160 Only)
ZyXEL NWA-3160 Series User’s Guide
83
The following table describes the labels in this screen.
6.1.2 The AP Statistics Screen
Use this screen to statistics relating to the APs managed by the ZyXEL Device. When the
ZyXEL Device is in AP controller mode, click AP Statistics in the Status screen. The
following screen displays.
Figure 49 AP Statistics
The following table describes the labels in this screen.
Table 13 AP List Status
LABEL DESCRIPTION
AP Description This is the description of the managed AP (either generated automatically,
or entered by you).
Model This is the managed AP’s model number.
Radio MAC This is the MAC (Media Access Control) address of the managed AP’s
wireles adapter.
802.11 Mode This displays the IEEE 802.11 wireless mode the managed AP is currently
using.
Channel ID This displays the wireless channel number the managed AP is currently
using.
SSID List This displays the SSID (Service Set IDentifier) that the managed AP is
currently using.
VLAN This displays the VLAN ID (Virtual LAN IDentifier) assigned to this
managed AP.
Stations This displays the number of wireless clients currently associated with the
managed AP.
Table 14 AP Statistics
LABEL DESCRIPTION
AP Description This is the description of the managed AP (either generated automatically,
or entered by you).
802.11 Mode This displays the IEEE 802.11 wireless mode the managed AP is currently
using.
Channel ID This displays the wireless channel number the managed AP is currently
using.
Rx PKT This displays the number of packets transmitted by the managed AP.
Tx PKT This displays the number of packets received by the managed AP.
Retry Count This displays the number of times a managed AP tries to resend packets.
FCS Error Count This displays the number of Frame Check Sequence errors experienced
by the managed AP.
Automatic Refresh
Interval
Select the frequency with which the ZyXEL Device updates this screen.