ZyXEL Communications NWA3160 - Manual (Page 172)

Chapter 14 Remote Management Screens
ZyXEL NWA-3160 Series User’s Guide
172
14.6.2.1 The SNMPv3 User Profile Screen (NWA-3165 Only)
Use this screen to set up the details of SNMPv3 users. Click Configure SNMPv3 User
Profile in the REMOTE MGNT > SNMP screen. The following screen displays.
Figure 108 Remote Management: SNMPv3 User Profile
Configure SNMPv3
User Profile
(NWA-3165 Only)
Click this to go to the SNMPv3 User Profile screen, where you can configure
administration and user login details.
SNMP
Service Port You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
Service Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 66 Remote Management: SNMP
LABEL DESCRIPTION