Introducing the web configurator, 1 accessing the web configurator, Chapter 2 introducing the web configurator – ZyXEL Communications NWA3160 User Manual
Page 41: Figure 8 enter the system name, Introducing the web configurator (41)
ZyXEL NWA-3160 Series User’s Guide
41
C
H A P T E R
2
Introducing the Web
Configurator
This chapter describes how to access the ZyXEL Device’s web configurator and provides an
overview of its screens.
"
When your ZyXEL Device is in (CAPWAP) Managed AP mode (NWA-3160 and
NWA-3163 only) the Web Configurator is not available. The ZyXEL Device can
be managed only through the controller AP’s web configurator.
2.1 Accessing the Web Configurator
1 Make sure your hardware is properly connected and prepare your computer or computer
network to connect to the ZyXEL Device (refer to the Quick Start Guide).
2 Launch your web browser.
FOR THE LOGIN SECTION:
3 If you have only one ZyXEL Device on your network, enter its System Name in your
browser’s address bar and press [ENTER]. The default System Name is NWA-Series.
See
for information on locating and changing the ZyXEL
Device’s System Name.
"
If you changed the System Name, and the new name is over 15 characters long,
you must enter NWA-Series instead.
Figure 8 Enter the System Name