ZyXEL Communications NWA3160 - Manual (Page 167)

Chapter 14 Remote Management Screens
ZyXEL NWA-3160 Series User’s Guide
167
14.5 SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP
protocol suite. Your ZyXEL Device supports SNMP agent functionality, which allows a
manager station to manage and monitor the ZyXEL Device through the network. The ZyXEL
Device supports SNMP version one (SNMPv1), and version two (SNMPv2c). The NWA-3165
alone also supports version 3 (SNMPv3), at the time of writing. The next figure illustrates an
SNMP management operation.
"
SNMP is available only if TCP/IP is configured.
Server Certificate Select the Server Certificate that the ZyXEL Device will use to identify itself. The
ZyXEL Device is the SSL server and must always authenticate itself to the SSL
client (the computer which requests the HTTPS connection with the ZyXEL
Device).
Authenticate
Client Certificates
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself with the ZyXEL Device by sending the ZyXEL Device a
certificate. To do that the SSL client must have a CA-signed certificate from a CA
that has been imported as a trusted CA on the ZyXEL Device (see the appendix on
importing certificates for details).
Server Port The HTTPS proxy server listens on port 443 by default. If you change the HTTPS
proxy server port to a different number on the ZyXEL Device, for example 8443,
then you must notify people who need to access the ZyXEL Device web
configurator to use "https://ZyXEL Device IP Address:8443" as the URL.
Server Access Select a ZyXEL Device interface from Server Access on which incoming HTTPS
access is allowed.
You can allow only secure web configurator access by setting the HTTP Server
Access field to Disable and setting the HTTPS Server Access field to an
interface(s).
Secured Client IP
Address
A secure client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 63 Remote Management: WWW
LABEL DESCRIPTION