ZyXEL Communications NWA3160 - Manual (Page 201)

Chapter 17 Log Screens
ZyXEL NWA-3160 Series User’s Guide
201
Figure 123 Log Settings
The following table describes the labels in this screen.
Table 79 Log Settings
LABEL DESCRIPTION
Address Info
Mail Server Enter the server name or the IP address of the mail server for the e-mail
addresses specified below. If this field is left blank, logs and alert messages
will not be sent via e-mail.
Mail Subject Type a title that you want to be in the subject line of the log e-mail message
that the ZyXEL Device sends.
Send Log to Logs are sent to the e-mail address specified in this field. If this field is left
blank, logs will not be sent via e-mail.
Send Alerts to Enter the e-mail address where the alert messages will be sent. If this field is
left blank, alert messages will not be sent via e-mail.
SMTP Authentication If you use SMTP authentication, the mail receiver should be the owner of the
SMTP account.
User Name If your e-mail account requires SMTP authentication, enter the username
here.
Password Enter the password associated with the above username.
Syslog Logging Syslog logging sends a log to an external syslog server used to store logs.
Active Click Active to enable syslog logging.
Syslog Server IP
Address
Enter the server name or IP address of the syslog server that will log the
selected categories of logs.