ZyXEL Communications P-2900-4HB - Manual (Page 77)

Chapter 10 Logs
P-2900-4HB User’s Guide
77
The following table describes the fields in this screen.
Table 18 Advanced Setup > Logs > Log Settings
LABEL DESCRIPTION
Address Info
Mail Server
Enter the server name or the IP address of the mail server for the e-mail
addresses specified below. If this field is left blank, logs and alert
messages will not be sent via e-mail.
Mail Subject Type a title that you want to be in the subject line of the log e-mail
message that the ZyXEL Device sends.
Send log to Logs are sent to the e-mail address specified in this field. If this field is
left blank, logs will not be sent via e-mail.
Send alerts to Alerts are sent to the e-mail address specified in this field. If this field is
left blank, alerts will not be sent via e-mail.
UNIX Syslog Syslog logging sends a log to an external syslog server used to store
logs.
Active Click Active to enable syslog logging.
Syslog IP
Address Enter the server name or IP address of the syslog server that will log the
selected categories of logs.
Log Facility Select a location from the drop down list box. The log facility allows you
to log the messages to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Send Log
Log Schedule
This drop-down menu is used to configure the frequency of log messages
being sent as E-mail:
• Daily
• Weekly
• Hourly
• When Log is Full
• None.
If you select Weekly or Daily, specify a time of day when the E-mail
should be sent. If you select Weekly, then also specify which day of the
week the E-mail should be sent. If you select When Log is Full, an alert
is sent when the log fills up. If you select None, no log messages are
sent
Day for
Sending Log Use the drop down list box to select which day of the week to send the
logs.
Time for
Sending Log Enter the time of the day in 24-hour format (for example 23:00 equals
11:00 pm) to send the logs.
Log Select the categories of logs that you want to record. Logs include alerts.
Send
Immediate
Alert Select the categories of alerts for which you want the ZyXEL Device to
instantly e-mail alerts to the e-mail address specified in the Send Alerts
To field.
Back Click Back to return to the previous screen.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to return to the previously saved settings.