beautypg.com

2 configuring static ip addresses – ZyXEL Communications P-2900-4HB User Manual

Page 43

background image

Chapter 4 Tutorials

P-2900-4HB User’s Guide

43

3

Log into the ZyXEL Device’s Web Configurator. Configure the Advanced Setup >
LAN screen as shown next. Click Apply.

4

Enable DHCP client on computers C1 and C2 by selecting Obtain an IP address
automatically
in the network settings. Connect them to the ZyXEL Device’s LAN
through a switch. Each of them should get an IP address respectively.

4.3.2 Configuring Static IP Addresses

Use this section to configure two static IP addresses for servers A and B.
Computers (C1~C2) also use one static IP address to access the Internet.