ZyXEL Communications P-2900-4HB - Manual (Page 51)

Chapter 5 LAN Setup
P-2900-4HB User’s Guide
51
5.2 The LAN Setup Screen
Click Advanced Setup > LAN > LAN Setup to open the LAN Setup screen.
Figure 15 Advanced Setup > LAN > LAN Setup
The following table describes the fields in this screen.
Table 8 Advanced Setup > LAN > LAN Setup
LABEL DESCRIPTION
DHCP
DHCP
If set to Server, your ZyXEL Device can assign IP addresses, an IP
default gateway and DNS servers to Windows 95, Windows NT and
other systems that support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and
relays DHCP requests and responses between the remote server and
the clients. Enter the IP address of the actual, remote DHCP server in
the Remote DHCP Server field in this case.
When DHCP is used, the following items need to be set.
Client IP Pool
Starting Address This field specifies the first of the contiguous addresses in the IP
address pool.
Size of Client IP
Pool This field specifies the size or count of the IP address pool.