1 network setup and ip settings – ZyXEL Communications P-2900-4HB User Manual
Page 42
Chapter 4 Tutorials
P-2900-4HB User’s Guide
42
This tutorial uses the following example settings:
Note: You have to apply for a public IP address if you need one and configure it as a
static IP address on the Web Configurator.
4.3.1 Network Setup and IP Settings
Use this section to set up the network and configure the IP settings on servers A
and B. This section also shows how to enable DHCP for LAN computers IP
assignments.
1
This tutorial assumes your ZyXEL Device has successfully connected to the cable
network. You should see the ONLINE LED is on from the ZyXEL Device’s front
panel.
2
Configure the IP addresses on A and B (see Table
). Connect them to the ZyXEL
Device’s LAN. Turn on the Web and FTP services on A and B respectively.
Table 7 IP Settings in this Tutorial
DEVICE / COMPUTER
IP ADDRESS
Static IP 1
1.1.1.1/24
Static IP 2
2.2.2.1/24
Static IP 3
3.3.3.1/24
LAN IPs
Management IP: 192.168.1.1/24
DHCP Type: Server
DHCP IP Range: 192.168.1.33~192.168.1.64
A’s IP
1.1.1.5/24 (IP-1), gateway: 1.1.1.1
B’s IP
2.2.2.5/24 (IP-2), gateway: 2.2.2.1
NAT
On, Many-to-One