ZyXEL Communications P-2900-4HB - Manual (Page 72)

Chapter 9 Remote Management Configuration
P-2900-4HB User’s Guide
72
You may only have one remote management session running at a time. The ZyXEL
Device automatically disconnects a remote management session of lower priority
when another remote management session of higher priority starts. The priorities
for the different types of remote management sessions are as follows.
1
Telnet
2
HTTP
Finding Out More
See Section 9.3 on page 74 for technical background information on remote
management configuration.
9.1.1 What You Can Do in the Remote Management Screen
Use the Remote Management screen ( Section 9.2 on page 72 ) to configure
through which interface and from which IP address users can use Telnet, FTP or
HTTP to manage the ZyXEL Device.
9.2 The Remote Management Screen
Click Advanced Setup > Remote Management to open the following screen.
Figure 24 Advanced Setup > Remote Management