ZyXEL Communications Ethernet-to-Fiber Media Converter MC1000-SFP-FP - Manual (Page 27)

MC1000-SFP-FP User’s Guide
27
A
P P E N D I X
A
Product Specifications
Table 2 Product Specifications
SPECIFICATION DESCRIPTION
Standards Supported IEEE 802.3 (10BASE-T Ethernet)
IEEE 802.3u (100BASE-TX/ Fast Ethernet)
IEEE 802.3ab (1000Base-T)
IEEE 802.3z (1000Base-SX/LX)
Interfaces One 10/100/1000 Mbps Ethernet port
Auto MDI/MDI-X support on RJ-45 port
One SFP slot for Gigabit Ethernet link
Extends distances up to 500m (1,650ft) for multi-mode fiber module
80km (317,625ft) for single-mode fiber module (depends on the SFP
transceiver you install)
Management Alarm LED illuminates to indicate link failure
Status LEDs for easy monitoring of device’s status
Connectors One RJ-45
One Fiber SFP
Maximum Distances allowed UTP: 100m (Cat 5/5e/6)
Fiber: SFP; up to 500m (multi-mode), 80km (single-mode; depends on the
SFP transceiver you install)
Cables Single-mode fiber: 9/125um
Multi-mode fiber: 50/125 or 62.5/125um
Copper: Cat 5/5E/6. Use 8-wire Ethernet cable for Gigabit Ethernet
Data Rates Fiber: 1000 Mbps
Copper: 10/100/1000Mbps
DIP Switches DIP 1 – LFS: Enable/disable Link Fault Signaling (LFS)
Power 12V DC, 0.8A, external power supply adapter
Frequency: 50 Hz to 60 Hz
Operating Environment Temperature: 0°C to 45°C
Humidity: 10% to 90%, non-condensing
Storage Environment Temperature: -20°C to 70°C
Humidity: 5% to 90%, non-condensing
Emissions FCC Part 15 of Class B & CE approved
Dimensions 194 x 130 x 26 mm (L x W x H)