ZyXEL Communications Ethernet-to-Fiber Media Converter MC1000-SFP-FP - Manual (Page 26)

Chapter 3 Deploying the MC1000-SFP-FP
MC1000-SFP-FP User’s Guide
26
1
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the MC1000-SFP-FP with the connection cables.
5 Align the holes on the back of the MC1000-SFP-FP with the screws on the wall. Hang
the MC1000-SFP-FP on the screws.
Figure 21 Wall-mounting Example