Zoom CableModem - Manual (Page 27)

Appendix A: Front Panel Information 23
Appendix
A
Front Panel Information
After you’ve correctly installed the Zoom Cable Modem, the
READY READY READY READY light, SYNC SYNC SYNC SYNC light, and USB USB USB USB light go on to indicate that
the modem is fully operational.
LIGHT NAME MODE STATUS
READY On Power is on.
USB On The USB computer interface is
connected, linked, and active.
Flickering The modem is synchronizing with
the cable network.
ACT Blinking Data activity is present on the cable.
The cable modem is communicating
with the cable network. This means
that it could be downloading or
uploading data to the cable service
provider and the Internet.
This light may flicker during the
synchronization process.
SYNC Blinking
Fast Searching for a data channel from
the cable provider.
Blinking
Slow Synchronizing with the cable
network and adjusting the signal for
optimum performance.
Steady On The modem is synchronized to the
cable network.