Zoom CableModem - Manual (Page 13)

Installing Your Cable Modem 9
After the modem completes a self-test, it synchronizes with the
cable network. During this process, the SYNC light blinks, rapidly
at first, then slowly. The USB and ACT lights may flicker briefly.
Note: Synchronization may take several minutes.
When the process is complete, the SYNC light becomes steady
On. For details on the front panel lights and their modes, see
Appendix A on page 23.
Now follow the steps below to install the driver.
USB Cable Modem Driver Installation
1 Restart your computer.
2 Insert the Zoom USB Cable Modem CD into your CD-ROM
drive. The CD will run automatically. (If it doesn’t, select My
Computer on your desktop. Then select the icon for your
CD-ROM drive.)
3
At the Zoom Cable Modem Main Menu, select Install
Cable Modem Drivers.
4 At the Zoom Cable Modem Driver Installation screen,
select USB, and then follow the prompts.