Configuring your computer’s network settings, Onfiguring, Omputer – Zoom CableModem User Manual
Page 14: Etwork, Ettings
10
Zoom USB Cable Modem User’s Manual
5
When the Zoom Cable Modem Driver Installation screen
reappears, click the Close box to exit.
6
Shut down your computer and complete the following steps to
connect the USB cable and finish the installation.
USB Cable Connection
Note: The driver must be installed before you connect the USB
cable.
1
Connect the USB cable from your modem to your computer.
The USB light on the modem’s front panel will go on,
indicating that the modem and the computer’s data interface
are linked. If the light does not go on, make sure that the USB
cable is securely connected at both the modem and the
computer.
2
Restart the computer.
3
If prompted, insert your Windows operating system CD and
follow the instructions.
4
If prompted, restart your computer one more time. Then
configure your computer’s network settings as described
below.
Configuring Your Computer’s Network
Settings
Select your operating system:
•
For Windows 98/Me network settings, see page 11.
•
For Windows 2000 network settings, see page 16.