Xerox 8560 User Manual
Page 96
Printing on Specialty Media
Phaser® 8560/8860 Printer
3-60
6.
Select one of the following Short Edge options:
■
Press the OK button if the correct short edge size is displayed as the current setup.
■
Select
Change
, and then press the OK button to enter a new short edge size. Press the
Up Arrow and Down Arrow buttons to specify the short edge size, and then press the
OK button.
7.
Select one of the following Long Edge options:
■
Press the OK button if the correct long edge size is displayed as the current setup.
■
Select
Change
, and then press the OK button to enter a new long edge size. Press the
Up Arrow and Down Arrow buttons to specify the long edge size, and then press the
OK button.
8.
Select the appropriate paper type, and then press the OK button.
9.
In the printer driver, select Tray 1 as the paper source.
Note:
When you define a new custom size, it is stored in the printer so it can be used again.
Up to five custom sizes can be stored in the printer. If you define a new custom size after five
custom sizes have been stored, the new custom size replaces the least recently used.