Xerox 8560 - Manual (Page 63)

Printing on Both Sides of the Paper
Phaser® 8560/8860 Printer
3-27
Printing on Both Sides of the Paper
This section includes:
■ Automatic 2-Sided Printing on page 3-27
■ Manual 2-Sided Printing on page 3-29
See also:
Online Support Assistant at www.xerox.com/office/8560Psupport or www.xerox.com/
office/8860support
Automatic 2-Sided Printing
Automatic 2-sided printing is available from all trays in the Phaser 8860 model and
Phaser 8560DN, Phaser 8560DT, and Phaser 8560DX configurations. Before printing a 2-
sided document, verify that the paper is a supported size and type for the tray.
■ For a list of supported paper sizes, see Supported Paper and Media on page 3-3.
■ For a list of paper types and weights, print the Paper Tips page on the control panel:
a. Select Information , and then press the OK button.
b. Select Information Pages , and then press the OK button.
c. Select Paper Tips Page , and then press the OK button.
The following specialty media should not be used for 2-sided printing:
■ Transparencies
■ Envelopes
■ Labels
See also:
Supported Paper and Media on page 3-3
Printer Configurations on page 1-4