Xerox DocuColor 40CP - Manual (Page 54)

38 Installing User Software on a Windows Computer
Server Name —Enter the IP address (or DNS name) of the DocuColor 40 CP.
New Device —Enter the name of the device that the DocuColor 40 CP is connected to:
DocuColor. This device name appears in the Printer Setup section of the Configuration
page.
4. When you have entered all the information, click Add.
5. With the device name (DocuColor) selected in the Devices list, click OK.
The DocuColor 40 CP appears in the list of available servers. The first line of the entry
displays the nickname you gave the server, followed by the protocol you chose. The
second line displays the device name.
6. With the device name (DocuColor) selected in the list of Available Servers, click OK to
begin using the software.
Modifying the configuration
You should edit the configuration whenever there is any change to your
DocuColor 40 CP server or network, such as an IP Address or DNS name. First
change the specific DocuColor 40 CP Setup information before configuring the
connection.
T O MODIFY THE CONFIGURATION :
1. To edit information for a DocuColor 40 CP in the list of available servers, select the
DocuColor 40 CP by its nickname and click Modify. Edit information in the Modify
Server Settings dialog box as necessary, and click OK when finished.
2. To add a new DocuColor 40 CP to the list of available servers, click Add. Configure the
Add New Server dialog box as outlined in step 3 through step 5 above.
3. To remove a DocuColor 40 CP from the list of available servers, select the
DocuColor 40 CP by its nickname and click Remove; then click Yes in the Remove
dialog box.