Xerox DocuColor 40CP - Manual (Page 27)

11 Setting up the DocuColor 40 CP as a PostScript printer
T O SET UP IPX/SPX PRINTING :
1. Open the Windows 95 Control Panel.
2. Double-click the Network icon.
Make sure that IPX/SPX-compatible Protocol and TCP/IP protocol are both listed in
the Installed Network Components section.
For instructions, see your Windows 95 documentation.
N OTE : You must enable TCP/IP printing to ensure that all files required for IPX/SPX
will be installed. You can select it and click Remove after you set up IPX/SPX if you do
not need to use the TCP/IP protocol.
3. Double-click the IPX/SPX-compatible Protocol icon.
4. Click the Advanced tab.
5. In the Property list, click Frame Type. In the Value pop-up menu, select the Frame
Type that corresponds to the one set during DocuColor 40 CP Network Setup.
If necessary, print the Configuration page from the Control Panel to check which
Frame Type(s) are configured.