Xerox DocuColor 40CP - Manual (Page 32)

16 Installing User Software on a Windows Computer
5. Expand the levels to locate your printer and the print connection (Print, Hold, or
Direct) to which you want to print.
The printer name you are browsing for is the Server Name listed under Network Setup
on the Configuration Page. This name may not be the same as the Server Name listed
under Server Setup on the Configuration Page (which is the name displayed on the
Control Panel).
The network environment and the amount of network traffic determines the amount
of time required for the Browse function.
6. Select the print connection under the printer and click OK.
7. In the Add Port dialog box, verify that the network path is correct and click OK.
8. To confirm the connection, click the General tab in the Properties dialog box.
9. Click Print Test Page, and click OK.
10. The Job Notes window appears. Type in any information about this job that you want
and click OK.
If the test page prints successfully, you are ready to print from the computer.