Mac os, Unix (tcp/ip) – Xerox DocuColor 40CP User Manual
Page 14
xiv
Introduction
Mac OS
To print to the DocuColor 40 CP, you need:
• A Mac OS-based computer
• At least 8MB of RAM
• EtherTalk installed
• Apple System software version 7.5 or later
• Adobe PostScript Printer Driver version 8.5 or later (version 8.5.1 is included with
the user software)
To use the DocuColor utilities (Downloader and Print Calibrator), you also need:
• A Power Macintosh computer
• At least 16MB of RAM
To use WebTools, you also need:
• Netscape Communicator v4.0.4 with Java enabled
N
OTE
:
Netscape continues to release frequent updates to its browser. As support cannot
be guaranteed for all versions, use the version specified above for best results.
• A TCP/IP enabled network and the IP address or DNS name of the
DocuColor 40 CP
• Web Services enabled on the DocuColor 40 CP
UNIX (TCP/IP)
To print to the DocuColor 40 CP with a UNIX workstation, you need:
• A workstation with standard TCP/IP connectivity (for example, Sun SPARCstation
or Silicon Graphics workstation with Solaris version 2.x or SunOS version 4.1.x
software)
• TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)