Xerox DocuColor 40CP User Manual
Page 22
6
Installing User Software on a Windows Computer
Completing the Windows 95 connection
To print from Windows 95 you need to:
• Set up network servers, if any
• Set up the DocuColor 40 CP to accept print jobs from your computer
• Configure a port on each Windows 95 computer for the network or connection type
Completing the Windows 95 parallel port connection
Preparing a parallel port connection for Windows 95 requires specific BIOS settings
on your computer, and specific port and printer settings for Windows 95. In addition,
a change to one of the DocuColor 40 CP Setup settings may be required if you choose
to spool files to the DocuColor 40 CP rather than print directly.
T
O
PREPARE
THE
D
OCU
C
OLOR
40 CP
AND
YOUR
COMPUTER
FOR
PARALLEL
PORT
PRINTING
:
1.
Connect the DocuColor 40 CP to the parallel port on your computer.
For instructions, see the
Configuration Guide
.
2.
In Network Setup>Port Setup>Parallel Port Setup, set Enable Parallel Port to Yes.
For more information about DocuColor 40 CP Setup, see the
Configuration Guide
.
3.
If you want to spool files to the DocuColor 40 CP, set Port Timeout in Seconds to 10.
If you want to print directly to the DocuColor 40 CP, set Port Timeout in Seconds to 5.
Setting this option to 10 seconds ensures that spooling is not interrupted due to
timeout.
For this type of connection:
See:
Parallel
below
IPX/SPX
IPX (Novell)
SMB printing