Xerox DocuColor 40CP - Manual (Page 12)

xii Introduction
System requirements
To install the DocuColor 40 CP user software on a Windows or Mac OS computer,
the computer must be equipped with a built-in or external CD-ROM drive.
Windows
To print to the DocuColor 40 CP, you need:
• A Windows-based computer with an 80486, AMD, or Pentium processor
• Windows 95, Windows 3.1x, or Windows NT 4.0
• At least 4MB of RAM
To use the DocuColor utilities (Downloader and Print Calibrator) you also need:
• Either Windows 95 or Windows NT 4.0 with NT Service Pack 3
• At least 16MB of RAM
Print Calibrator Enables you to calibrate the DocuColor 40 CP
remotely from a Windows 95, Windows NT 4.0, or
Mac OS computer. Proper calibration keeps color
consistent across time. Also allows you to create
custom calibration and simulation targets.
Color management files ColorSync and ICM color management files that
enable you to maintain consistent color from your
original artwork to the colors displayed on your
monitor to the printed output.
Color reference files Reference pages that you can print to view the range
of colors available on your DocuColor 40 CP. For
the most predictable color results, refer to these
pages when defining colors in applications.