Xerox DocuColor 40CP User Manual
Page 35
19
Setting up the DocuColor 40 CP as a PostScript printer
Setting the DocuColor 40 CP as the default printer with Windows 3.1x
You can specify the DocuColor 40 CP as the default printer. Many Windows
applications use the default printer when you choose the Print command.
T
O
SET
THE
D
OCU
C
OLOR
40 CP
AS
THE
DEFAULT
PRINTER
:
1.
In the Control Panel window, double-click the Printers icon.
The Printers window appears.
2.
Select the DocuColor 40 CP from the Installed Printers box.
3.
Click Set As Default Printer.
The DocuColor 40 CP appears in the Default Printer area of the Printers window.
Completing the Windows 3.1x connection
To print from Windows 3.1x you need to:
• Configure a port on each Windows 3.1x computer for the network or connection
type
• Complete setup for the network type you are printing over
• Set up the DocuColor 40 CP to accept print jobs from your computer
Selecting a printer port with Windows 3.1x
When you install a printer, Windows assigns it to a default printer port. If the
DocuColor 40 CP is connected to your computer through a network or you want to
assign it to a different port, you need to change the port assignment. Check with your
system administrator about which port to use.
You can also use this procedure to enable printing with the parallel port.
For this type of connection:
See:
Parallel
below
IPX (Novell)