Xerox DocuPrint Personal Laser Printer P1202 - Manual (Page 29)

Configuring the PCL Drivers
Chapter 4: Printing 4-5
PCL 6 Driver
Features
Paper/Output
Use this tab to change the number of copies, page orientation, paper
size, paper source and output format.
Source setting identifies the default paper source. Tray 2 source is
available if the optional Tray 2 is installed.
Manual Feed source is used when printing on special media. The
default Auto Continue value of the printer is 15 seconds, meaning
that the printer will wait up to 15 seconds for you to press the
control panel button before printing. Afterwards the printer will
attempt to print from whatever paper source is available. If the
paper source is set to Auto Select, the printer automatically selects
the print material according to the following priority: MP Tray,
Tray 1, Tray 2.
If Reverse Print Order is selected, the job will be printed in
reverse order, i.e. the last page printed is the first page of the
document.
The Images per Sheet feature will print multiple pages of an
electronic document onto one physical sheet. The driver has the
following selections for this feature:
1-Up, 2-Up, 4-Up, 6-Up, 9-Up, 16-Up
For example, if you have a four-page electronic document and you
select Images per Sheet to be 2-Up, each physical sheet printed will
contain 2 electronic pages per sheet.
For more information on Manual Duplex Printing, see the section.
For more information on Booklet Printing, see the section.