Xerox DocuPrint Personal Laser Printer P1202 - Manual (Page 16)

Connecting to the Computer
2-2 DocuPrint P1202 Reference Guide
Connecting to the Computer
Your printer can be connected to a Windows-based PC or to an
Apple Macintosh computer (see the note, below). Refer to Table 2.1
for your connection options and the appropriate page in this guide
for connection instructions.
Table 2.1 Interface options
Interface Windows PC Macintosh
Parallel Yes Not available.
USB Yes
*
*
Windows 98 systems only.
Not available.
Serial
†
†
Requires installation of the optional Serial/LocalTalk interface board. Refer
to Appendix B: Printer Options for installation instructions.
Yes Not available.
LocalTalk
†
Not available. Yes
To print documents from a Macintosh computer, you must install the
following optional printer accessories:
• PostScript Level 2 option
• Additional memory SIMM (minimum 8 MB)
• Serial/LocalTalk interface board
If you do not have these accessories, contact your authorized Xerox
dealer. Installation instructions for these options can be found in
Appendix B: Printer Options.
Once you have installed the required options and connected your
printer, you will need to install the PostScript PPD file. This driver
is provided on the CD-ROM that came with your printer.
Installation instructions are provided in the section “Installing the
PostScript PPD” (page 2-4).