ZyXEL Communications ES-4024A - Manual (Page 98)

ES-4024A Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
98
Step 2: In the map object properties, give the label name and enter the IP
address of the selected device. In this example, we configure 172.23.3.11 as
its IP address of your Switch as shown in Figure 5
Figure 5 Map Object Properties
Step 4: In the map object properties, select Access tab to set the parameters
of Read Access Mode to SNMP V2c shown in Figure 6. Change the value of
Add a new device