Xerox 701P21110 - Manual (Page 36)

Managing and printing jobs from the Tape Client
2-12 Tape Client Job Submission Guide
1. In the Move field on the Tape Client window, click Tape
Mark.... The Move Tape Mark window opens.
Figure 2-9. Move Tape Mark window
2. On the Move Tape Mark window, enter the number of tape
marks (files) that you want to skip; or click the arrow buttons
until the number that you want is displayed.
3. Select the direction in which you want to move the tape: RWD
(rewind, or backward) or FWD (forward).
4. Click Move. The Move Tape Mark window closes, and the
tape advances or rewinds past the number of tape marks that
you indicated.