Xerox 701P21110 - Manual (Page 33)

Managing and printing jobs from the Tape Client
Tape Client Job Submission Guide 2-9
1. Obtain the initial JDL, JDE, and (if required) form names if
you do not already know them. These resource files must be
stored in the “lcds” folder on the printing system internal disk
before they can be used for a print job.
If the resources that you need are not present in the “lcds”
folder, you can create them using PDL or a forms creation
software package such as Elixir. You can also import the
LCDS resources from diskette, tape, CD-ROM, or other
folders in the UNIX file system where they may be stored.
(Refer to “Importing resource files,” earlier in this chapter for
the procedure.)
2. Open the Tape Client window.
3. In the Document Group box, click Initial JDL..., Initial JDE...,
or Initial Form.... The resource library window opens for the
initial resource that you selected.
Figure 2-6. Document field on Tape Client window
Resource library windows display a list of all resource files of
a selected type that are stored in the “lcds” folder on the
controller disk. The following figure shows the JDL window.