Xerox 701P21110 - Manual (Page 13)

Tape Client Job Submission Guide xiii
Introduction
The Tape Client Job Submission Guide provides the information
you need to set up and submit jobs from tape, using the Tape
Client software. This document is intended for the programmer
or user who submits jobs to the printer, and for the operator, who
is responsible for the day-to-day operations of the DocuPrint
2000 Series 75/90/100/115/135/155/180 Enterprise Printing
System.
About this guide
Before using this guide, become familiar with its contents and
conventions.
Contents
This guide contains the following chapters:
• The “Introduction” provides a description of conventions used
in this document, and lists related documentation.
• Chapter 1, “Tape Client Overview,” provides a description of
the features, capabilities, and functions of the Tape Client.
• Chapter 2, “Managing and printing jobs from the Tape Client,”
gives instructions on setting up the system to print tape jobs,
and describes the procedure for printing offline to the DP
2000 Series EPS.
• Chapter 3, “Managing the Tape Client,” gives procedures for
using the Tape Client user interface screens to set up the
printer for offline printing, and to manage tapes.
An index is provided at the end of this document.