Winbook X Series X2 - Manual (Page 153)

PCMCIA
PROBLEM: I cannot fit my PC Card into the PCMCIA slot.
ACTIONS:
• If the card is a Type III card, you will not be able to use the card with
your WinBook X Series computer. Your PCMCIA slot will only accept
Type I or Type II cards.
PROBLEM: The PC Card is not operating properly.
ACTIONS:
• Make sure that the card is properly seated.
• Although a PC Card can be hot swapped in at any time, the functioning
of some cards (such as drive cards or network cards) might require that
you reboot with the card in place.
• Check with the card manufacturer to determine if there are updated
drivers for the card. This might be especially useful if that card is an
older card that predates your operating system.
Pointing Devices
PROBLEM: I plugged an external PS/2 pointing device into the
WinBook notebook, but it doesn’t work.
ACTIONS:
• Check to make sure that the PS/2 port has not been disabled. Reboot
the system and press [F2] to enter the Setup program. Use the right-
arrow key to move to the Advanced Menu. Scroll down to the I/O Device
Configuration Submenu. Hit [Enter] to enter this submenu. Scroll down
to PS/2 Mouse. If the port is disabled, use the [+] key to toggle the setting
to “Auto Detect.” Hit [Esc] twice to go to the Exit Menu. Hit [Enter]
8.20
Series
User’s Manual
X Manual WinME w/photos 2/01/01 3/19/01 4:24 PM Page 158