Winbook X Series X2 - Manual (Page 150)

the power is off. If the Notebook is left without a power source for too
long, this battery will be exhausted and system information will be lost.
Contact Technical Support for information about replacement.
PROBLEM: My computer keeps beeping at me.
ACTIONS:
• Your battery has reached a critical low power level. Save your current
work and shut down your computer, connect your AC Adapter or swap
in a fresh battery.
PROBLEM: System is not using AC power source when AC adapter
is connected.
ACTIONS:
• Make sure all connections are secure.
• Make sure that there is electricity from the outlet.
• If you are using a surge protector or power strip, be certain that it is
not shut off.
• Check for damage to the cords or the adapter. If cords or adapter are
damaged, replace them.
PROBLEM: System will not run on battery power.
ACTIONS:
• Be sure the battery is properly installed in the battery bay.
• Plug in the AC adapter, boot the computer and then check the battery
level. Be sure that it is charged.
Chapter 8: Troubleshooting
8.17
X Manual WinME w/photos 2/01/01 3/19/01 4:24 PM Page 155