Winbook X Series X2 - Manual (Page 135)

Audio
Note: There are two ways to mute your system: the Mute hot key
[Fn]+[F6] and the Mute control on the software audio mixer.
PROBLEM: My music CDs won’t play.
ACTIONS:
• Under Windows, the audio program should start up as soon as an audio
CD is detected in the drive. Make sure the Media Player or CD Player
program is running in Windows. If it is not, then start the program
(Start/Programs/Accessories/Entertainment/CD Player).
• Check the volume level. Double-click on the speaker icon on the task-
bar to be certain that the system volume and CD volume are both turned
up (and that neither is muted). Press and hold the [Fn]+[F8] hot key
combination to increase system volume.
• Check that Mute is not enabled. Press [Fn]+[F6] to toggle the Mute
setting.
• Check that the software volume control is not turned down. For example,
the Windows Media Player has a volume control slide. Move the slide to
the right to raise the volume level.
• Double-click on the speaker icon on the taskbar. Make sure that the select
box for CD Audio is checked and that the volume is at maximum level.
PROBLEM: I can’t hear sound on my headphones.
ACTIONS:
• Check the volume level. Double-click on the speaker icon on the taskbar
to be certain that the system volume and other volume settings are all
8.2
Series
User’s Manual
X Manual WinME w/photos 2/01/01 3/19/01 4:24 PM Page 140