Western Digital 4CH TRIPLEX - Manual (Page 57)

5-10. OSD position and Screen size Adjustment
The position of OSD on LIVE screen can be adjusted up and down.
Depending on the characteristics of the monitor, being able to adjust the position of OSD and
Screen Size may be a very useful feature.
5-10-1. Adjusting OSD Ceiling & Bottom Line
Place the cursor on CEILING/BOPTTOM LINE and then use and SEL button, and the
dark horizontal line across the top/bottom of the screen to adjust the OSD position.
5-10-2. Adjusting Screen size
If your monitor does not display verges of screen, you can make the screen size shrunk.
Select SCREEN SIZE menu and then set screen size with SEL button.
5-11. Motion Detection Region Setup
MUX recording mode not only allows full screen motion detection but also lets you assign 4
motion detection regions per channel.
5-11-1. Region Setup
1. Select INDIVIDUAL on REGION field in the MOTION menu and press SEL button to go
to Motion Region Setting screen.
57