Canon IXUS 50 - Manual (Page 64)

62
• See Functions Available in Each Shooting Mode (p. 192).
• With the Review function, you can change the length of time images
show on the LCD monitor after shooting, or set it so they do not show
at all (p. 62).
Reviewing an Image Right After Shooting
Right after a shot is taken, the image appears in the LCD monitor for 2
seconds. In addition, the images will keep on displaying regardless of the
review duration setting if one of the following operations is performed.
• Keeping the shutter button pressed after a shot.
• Pressing the FUNC./SET button while the image is displayed on the LCD
monitor (except in mode).
Press the shutter button halfway to stop displaying it so that you can shoot the
next frame.
• You can do the following while the image is displayed (except in
mode).
- Display the image’s information (p. 40).
- Erase the image (p. 131).
- Display the magnified image (p. 114).
(when the image is displayed with the FUNC./SET button or the Hold option
has been selected)
6 Press the shutter button fully (p. 47).
• You will hear the sound of the shutter
when the shutter activates.
• The picture appears for two seconds on
the LCD monitor.
Shooting Mode