Canon IXUS 50 - Manual (Page 158)

156
• A TV set cannot be used in Stitch Assist mode.
• Refer to pp. 50, 57 for instructions regarding the video output signal.
• No image will appear on the LCD monitor when the camera is
connected to a TV.
• If the TV is a stereo model, you can plug the audio plug into either
the left or right Audio In jack. Please refer to the TV’s manual for
details.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 57). The default setting
varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may not
display properly.