Wolf Ventilation Hood - Manual (Page 6)

Cooktop Chimney Hood Specifications 6
Installation Considerations
Wolf cooktop chimney hoods are recommended for
use with Wolf induction, electric and gas cooktops and
integrated modules.
Cooktop chimney wall and island hoods are shipped
without the blower assembly. Internal, in-line and remote
blowers are available through your authorized Wolf dealer.
For local dealer information, visit the find a showroom
section of our website, wolfappliance.com.
The blower will vary in size and is dictated by the cooking
unit, the volume of air that needs to be moved and the
length of the duct run. Refer to ventilation recommenda-
tions in the Wolf design guide. These hoods have an
8" (203) round duct with vertical discharge.
IMPORTANT NOTE: Use only a Wolf blower with the
cooktop chimney hood.
BACKSPLASH
Optional stainless steel backsplashes are available in
widths to match cooktop chimney wall hoods through
your authorized Wolf dealer. For local dealer information,
visit the find a showroom section of our website,
wolfappliance.com.
Before You Start
• Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the Wolf warranty. Refer to the cooktop
chimney ventilation hoods use & care information for
warranty details, or visit the contact & support section
of our website, wolfappliance.com.
• Make sure you have the tools and materials necessary
for proper installation.
• Any required service must be performed by a Wolf
authorized service center. Wolf is not responsible for
service required to correct a faulty installation.
• Wolf cooktop chimney hoods are shipped without the
blower assembly. Internal, in-line and remote blowers
are available through your authorized Wolf dealer.