Wolf Ventilation Hood - Manual (Page 3)

IMPORTANT NOTE: Wolf cooktop chimney hoods are
recommended for use with Wolf induction, electric and
gas cooktops and integrated modules. For ranges and
rangetops, a Wolf pro ventilation hood is recommended.
Wolf Cooktop Chimney Ventilation Hoods 3
wolfappliance.com/specs
Cooktop Chimney Hood Installation
IMPORTANT NOTE: This installation must be completed
by a qualified installer or Wolf factory certified service.
Read this entire installation guide prior to installation and
save for the local inspector’s reference. The homeowner
should keep this installation guide for future reference.
This appliance must be installed in accordance with
National Electrical Codes, as well as all state, municipal
and local codes. The correct voltage, frequency and
amperage must be supplied to the appliance from a dedi-
cated, grounded circuit which is protected by a properly
sized circuit breaker or time delay fuse. The proper
voltage, frequency and amperage ratings are listed on the
product rating plate.
Record the model and serial numbers before installing the
ventilation hood. Both numbers are listed on the product
rating plate, located inside the left wall of the hood shell,
above the filter. The filter must be removed to access the
rating plate. Refer to the illustration below.
Wolf Cooktop Chimney Hood
Model Number
Serial Number
Location of rating plate.
(inside hood).
RATING PLATE